Cautions - GRASS VALLEY L-S series Instruction Manual

Cautions

JUPITER L-S and LCD Series Control Panel Instruction Manual
— Use only the power cord supplied or specified for
Use proper power cord
this product.
— Connect the grounding conductor of the power cord to
Ground product
earth ground.
Operate only with covers and enclosure panels in place
product when covers or enclosure panels are removed.
— Use only the fuse type and rating specified for this
Use correct fuse
product.
Use only in dry environment
Use only in non-explosive environment
explosive atmosphere.
High leakage current may be present
before connecting power.
Dual power supplies may be present
cord into a separate branch circuit employing a separate service ground.
Disconnect both power supply cords prior to servicing.
Double pole neutral fusing
— Do not use door latches to lift or move equipment.
Use proper lift points
Avoid mechanical hazards
servicing.
The following caution statements identify conditions or practices that can
result in damage to equipment or other property:
Use correct power Source
that applies more than the voltage specified for the product.
Use correct voltage setting
plies, before applying power ensure that the each power supply is set to
match the power Source.
Provide proper ventilation
ment ventilation in accordance with installation instructions.
Use anti-static procedures
may be damaged by electrostatic discharge. Use anti-static procedures,
equipment and surfaces during servicing.
— Do not operate in wet or damp conditions.
— Do not operate this product in an
— Earth connection of product is essential
— Be certain to plug each power supply
— Disconnect mains power prior to servicing.
— Allow all rotating devices to come to a stop before
— Do not operate this product from a power Source
— If this product lacks auto-ranging power sup-
— To prevent product overheating, provide equip-
— Static sensitive components are present which
Safety Summary
— Do not operate this
17