Section 1 - L-S Series Introduction; Overview - GRASS VALLEY L-S series Instruction Manual

L-S series Introduction

Overview

JUPITER L-S and LCD Series Control Panel Instruction Manual
The Jupiter L-S series Control panels are designed to control television
matrix routers through a Grass Valley Jupiter CM-4000 Control System
running the AccuSwitch application. Although the panels are primarily
intended to control Concerto, Trinix, Apex, and Venus routers, any matrix
router that can be controlled by a CM-4000/AccuSwitch can also be con-
trolled by these panels.
Note The CM-4000 must be operating with Jupiter AccuSwitch version 7.6 or
newer to support the L-S panels. The L-S panels are not intended for use with
CM-4000/JupiterXPress applications nor with Jupiter VM-3000 System Con-
trollers.
The L-S series is comprised of the following units:
• L32, L64, LD4, and LD16
• S25, S50, S100, and SXY
L prefix panels have large (1/2- inch) multi-color buttons. S prefix panels
are equipped with smaller (3/8-inch) multi-color buttons.
L-S panels can be ordered with an AC or DC power supply. The AC power
supply mounts on the rear of the panel. No power switch is present. The
AC or DC line cord is disconnected to power down the panel.
1
Section
31