Menu Selection Method; Selecting A Source; Direct Selection Method - GRASS VALLEY L-S series Instruction Manual

Menu Selection Method

Selecting a Source

Direct Selection Method

JUPITER L-S and LCD Series Control Panel Instruction Manual
1. Clear the panel (
Level
2. Press the button. The window will display configuration modes.
Menu
3. If necessary, use the
mode.
4. Press . Destination names will appear in the Status (L32) or Preset
Take
(L64) window.
5. Use the arrow buttons to scroll to the desired Destination.
Up/Down
6. Press . The Destination window will display the name of the
Take
Destination now being controlled.
You will now be able to select a different Source for that Destination.
The following information explains how to select a source.
Working with a Locked or Procted Destination
If a Destination has been Protected or Locked by another panel, the
button will illuminate steady amber (Protect) or red (Lock) and the
Lock
Destination will not be able to be switched. To continue:
• The Destination must be unprotected or unlocked by the panel that set
the protect or lock (the name of that other panel will be displayed in the
menu).
• The panel can force the destination to be unprocted or unlocked if the
pannel has a password set. See the 7.8.1 Jupiter Release notes (part #
071827511) for more information.
Buttons configured for Sources illuminate in green.
1. Clear the panel (
Level
2. Press the low green button for the desired Source. The Source will be
switched to that Destination, the button will illuminate in bright green,
and the name for the Source will be shown in green in the Status
window.
, , and buttons OFF).
Menu Preset
arrow buttons to scroll to
Up/Down
, , and buttons OFF)
Menu Preset
L32/L64 Control Panels
Select Destination?
Protect/
103