Multi-Network Ip Configuration; Network Configuration Procedure (Netconfig) - GRASS VALLEY L-S series Instruction Manual

Section 3 — Software Installation & IP Addresses

Multi-Network IP Configuration

Network Configuration Procedure (NetConfig)

54
A "remote" L-S panel can be placed on a network separate from the other
Jupiter devices. For example, L-S panel can be placed on a facility LAN. In
Figure 24, an IP router serves as a gateway between two networks.
Figure 24. LAN Addressing With Remote L-S Panel Example
Jupiter
File Server IP
CM-4000 System Controller
192.168.253.1
IP switch
Gateway
IP
192.168.1.1
Configuration is similar to that just described, except that the address of the
gateway must be entered on the web page for the remote panel.
For more information on IP addressing, see the Jupiter CM-4000 Installation
and Operating Manual.
The network configuration procedure requires the Grass Valley NetConfig
application v2.0.9 or newer. NetConfig is supplied on the CD shipped with
the panel (see NetConfig Installation on page
JUPITER L-S and LCD Series Control Panel Instruction Manual
Panel ID
03
Panel ID
02
Panel ID
01
NOTE: 64 Panels per CM maximum
IP
192.168.253.10
10/100baseT
Jupiter LAN
Remote L-S panel
Facility LAN
Panel ID
64
50).
Panel IP
192.168.253.103
Panel IP
192.168.253.102
Panel IP
192.168.253.101
Remote Panel IP:
192.168.1.164"
Gateway:
192.168.1.1