Lcd16 - GRASS VALLEY L-S series Instruction Manual

LCD16

JUPITER L-S and LCD Series Control Panel Instruction Manual
6. Use the Scroll wheel to change the Connection type in the N: field to
Serial.
The button will then turn green
Take
Figure 61. SXY Take Button
Take Button
7. Press the button to apply the change. You will then be given an
Take
option to change the Device ID.
8. Use the Scroll wheel to scroll to the preferred Device ID setting.
9. Press the button to apply the change.
Take
The Panel will then reboot and apply the changed settings.
Note Press the Clear button at any time to exit the menu without making changes
to the current settings.
Figure 62. LCD16 Control Panel
Button #1
Changing the Connection Type Using the Panel's Menu
(Figure
Buttons #1-16
).
Scroll Wheel
91