Sequence (Salvo) Switching (Ld4 Panel); Front-Panel Service Modes - GRASS VALLEY L-S series Instruction Manual

Sequence (Salvo) Switching (LD4 Panel)

Front-Panel Service Modes

JUPITER L-S and LCD Series Control Panel Instruction Manual
4. Press the soft button next to the desired override.
5. To execute the override switch, press
specified in the override will be switched to the Destination.
Pre-built Jupiter sequences can be executed after they have been created
and downloaded (see
1. Press , use the
Menu
window and press its soft button.
2. Sequences will appear in groups of four, in white, in the display
windows. Use the
sequences.
3. Press the soft key for the desired sequence. The number of the preset
sequence will appear in the Status window.
4. Press to execute the sequence.
Take
These modes are provided for panel maintenance and troubleshooting.
They are not normally used by the operator.
• Panel Info Mode is described on
• Panel Setup Mode is described on
Take
Setting Up a Salvo with a Sequence Set on page
arrow buttons to display
Up/Down
arrow buttons to scroll to the additional
Up/Down
page 183.
page 185.
LD4 Control Panel
. The Sources on the levels
in the D1
Sequence?
63).
119