Valley USA, LLC, or one of its affiliates or subsidiaries. All other intellectual property rights are owned by GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or subsidiaries. All third party intellectual property rights (including logos or icons) remain the property of their respective owners.
Use anti-static procedures, equipment and surfaces during servicing. The presence of this symbol in or on Grass Valley equipment means that it has been tested and certified as complying with applicable Underwriters Laboratory (UL) regulations and recommendations for USA.
Page 5
Notices Warnings A warning indicates a possible hazard to personnel, which may cause injury or death. Observe the following general warnings when using or working on this equipment: • Any instructions in this manual that require opening the equipment cover or enclosure are for use by qualified service personnel only.
• Do not leave the OCP 400 in direct sunlight or close to heating appliances for extended periods. • Do not connect Grass Valley OCP 400 with other manufacturer’s camera system parts. • Make connections swiftly and firmly to avoid false error messages.
Grass Valley believes this environmental information to be correct but cannot guarantee its completeness or accuracy since it is based on data received from sources outside our company. All specifications are subject to change without notice.
OCP 400 Maintenance Manual Laser Safety - Fiber Output SFP and QSFP Modules Warning LASER SAFETY The average optical output power does not exceed 0 dBm (1mW) under normal operating conditions. Unused optical outputs should be covered to prevent direct exposure to the laser beam.
Notices Safety and EMC Standards This equipment complies with the following standards: Safety Standards IEC62368-1:2018 Audio/video, information and communication technology equipment: part 1 EN 62368-1:2018 EU national deviations. EMC Standards This unit conforms to the relevant Union harmonization legislation and the requirements of the following directive/standards: RED 2014/53/EU EMC testing;...
Page 10
OCP 400 Maintenance Manual This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Maintenance Manual EMC performance of cables and connectors Grass Valley products are designed to meet or exceed the requirements of the appropriate European EMC standards. In order to achieve this performance in real installations it is essential to use cables and connectors with good EMC characteristics.
Page 14
8926 464 0x001 - CONTR. PANEL OCP400 JOYSTICK List of Field Replacable Units (FRUs): Part Number Description Quantity 8926 590 30001 AC ADAPTER 15Volts / 3,34AMPS 500-00080-01 ASSY MONOKNOB WIRED...
Page 20
3922 496 31041 - SERVICE ASSY KNOBS OCP400 List of Field Replacable Units (FRUs): Part Number Description Quantity 3922 496 31041 SERVICE ASSY KNOBS OCP400 ↓ FRU kit contains Parts cannot be ordered separately 2422 129 16907 SWITCH EAO 95-313.000 DATE CODE > 34607 3922 203 00010 CONTR.KNOB BLUE DIA 12 SH.6 3922 203 00011...
3922 496 31041 - SERVICE ASSY KNOBS OCP400 (FRU) LENS FOR SWITCH SQ19 MM LENS FOR SWITCH SQ12.7 MM DIFFUSER FOR SWITCH SQ19 DIFFUSER FOR SWITCH SQ12.7 SWITCH EAO 95-313.000 CONTR.KNOB BLUE/GREY/RED/GREEN DIA 12 SH.6 SMALL BUTTON TOP OPALE CAP LIGHT GUIDE COMPRESS.SPRING 0.2X1.6X13.3 BUTTON GUIDE...