Selecting A Destination To Control (Multiple Destination Mode); Selecting A Source (Multiple Destination Mode); Adding Or Changing A Destination Soft Button Assignment - GRASS VALLEY L-S series Instruction Manual

Section 6 — L-S Series Panel Operation

Selecting a Destination to Control (Multiple Destination Mode)

Selecting a Source (Multiple Destination Mode)

Adding or Changing a Destination Soft Button Assignment

116
1. Press the soft button next to the Destination to be controlled so it is
illuminated. Use the
Destinations.
2. Multiple Destinations on multiple pages can be selected, if desired.
Once Destination(s) to be controlled are selected, the Source is switched in
basically the same was as in Single Destination mode (see
(Single Destination Mode) on page 112
Direct Category Button Method
1. Press a Category (For example, "VTR") and unit number (For example,
"2") button combination.
2. Press .
Take
Page Selection Method
1. Press , then press the D4 window
Menu
2. The D1 window will display
groups of four, in green, in the D1-D4 windows.
3. Use the arrow buttons to scroll through the available Sources.
Up/Down
4. Select the desired Source by pressing its adjacent soft button.
5. To execute the switch, press
active Destination(s).
A Destination may be added to any unused location in the D1-D4 displays.
One additional page will be available when adding Destination assign-
ments. Destinations can also be changed or deleted.
Note Destinations that have been defined in the panel's CP Output set using the
Jupiter Configuration Editor cannot be changed using the panel itself. If such
an attempt is made, the panel will display the following message: "????" For
more information see
1. Press , then press the D3 window
Menu
page of Destination names will be displayed in the windows.
JUPITER L-S and LCD Series Control Panel Instruction Manual
arrow buttons to view additional pages of
Up/Down
for detailed information).
Select Source?
in white. Sources will appear in
Source?
. The Source will be switched to the
Take
Section 4-Jupiter System
Select Destination?
Selecting a Source
soft button.
Configuration.
soft button. A