Source Button; Line # 1; Line #2; Line #3 - GRASS VALLEY L-S series Instruction Manual

Section 7 — LCD Introduction

Source Button

Line # 1

Line #2

Line #3

Category Button

Line # 1
Line #2
Line #3
148
The following information is available for each Source button.
Specific status information will be shown on Line #1:
Page Numbers
The following information will only be displayed on Button #1 and will
time out after approximately 5 seconds.
Page numbers are displayed in the following format p: xxx/yyy.
xxx = Current page number.
yyy = Total number of pages.
The name of the Source will be shown on line #2.
Line #3 will be blank.
The following information is available for each Category button in the Cat-
egory Entry mode.
The Category name will be shown on Line #1:
There are two types of category entry buttons; Destination, which will be
shown as "Yellow" and Source, which will be shown as "Green." Both cat-
egories function exactly the same except that the Destination Category is
used to select Destination categories as defined in the Jupiter CP Output
set, and the Source Category buttons are used to select Source categories as
defined in the Jupiter CP Input set.
Line #2 will be blank.
The Direct entry digit number will be shown on line #3.
JUPITER L-S and LCD Series Control Panel Instruction Manual