Sticky Levels Mode; Protecting Or Locking A Destination - GRASS VALLEY L-S series Instruction Manual

Sticky Levels Mode

Protecting or Locking a Destination

JUPITER L-S and LCD Series Control Panel Instruction Manual
2. The name of the level and its current Source is shown in the Status
window.
If breakaway switching is performed often, you may want to leave sticky
mode ON.
To turn on Sticky Levels mode:
1. Press . The display windows will display various modes.
Select
2. Rotate the selector knob to
3. Scroll to
Sticky Level
4. Press to turn Sticky Level ON or OFF.
Select
The panel exits Config Mode and operates in the new Sticky Level mode.
1. Confirm that the desired Destination appears in the Destination
window. If not, see
2. Choose whether to protect or lock the Destination:
• To protect, press
indicating a protect operation in progress.
• To lock, press
Protect/Lock
cating a lock operation in progress.
The button will illuminate green.
Take
3. Press to protect or lock the Destination. The
Take
blink, indicating that panel has set the protect or lock.
• If another panel selects this Destination for control, that panel's
button will illuminate steady amber or red. If the other
Protect/Lock
panel attempts to switch this Destination, a
displayed, along with the name of the protecting panel.
• On S25 and S50 panels that lack a
when the controlled Destination is protected the Source button will
illuminate amber, and when locked it will be red.
and press
Panel Config?
. Its current status will be reported (-ON- or -OFF-).
Selecting a Destination to be Controlled on page
once. The button will illuminate amber,
Protect/Lock
twice. The button will illuminate red, indi-
Protect/Lock
SXY Control Panel
.
Select
135.
button will
Protect/Lock
or indicator will be
P L
button and display,
139