Locking - GRASS VALLEY L-S series Instruction Manual

Section 11 — LCD Series Panel Operation
Line #1:
P:LCD16

Locking

174
3. Press the button in the Command buttons section. The Destination
Take
button will then change color to magenta. The
also blink magenta.
Note If the Sticky Destination feature has been turned on for the panel, the button
will be white. Press the selected button again to change the color.
The letter "P" will appear in front of the name of the panel that pro-
tected the Destination. See
Figure 93. Protected Destination Displayed
P:LCD16
PINP-004
OUT-255
Locking a Destination prevents that Destination from being switched by
any panel in the system, including the initiating panel. If any of a Destina-
tion's level is locked, the
red.
Locking a Destination
To lock a Destination:
1. Select the Destination you wish to lock by pressing the button.
2. Press the
Protect/Lock
button will then turn a solid red.
3. Press the button in the Command buttons section. The
Take
Destination's button color will then change to red and the
button will blink red.
Note If the Sticky Destination feature has been turned on for the panel, the button
will be white. Press the selected button again to change the color.
The letter "L" will appear in front of the name of the panel that pro-
tected the Destination. See
JUPITER L-S and LCD Series Control Panel Instruction Manual
Figure 93 for an example.
button on that panel will illuminate
Lock/Protect
button in the Command buttons section twice. The
Figure 94 for an example.
button will
Protect-Lock
Protect/Lock