Gpi/O Pin Mapping; Gpo - GRASS VALLEY L-S series Instruction Manual

Configuration Instructions

GPI/O Pin Mapping

The tables and figures in this section will help you when configuring the
GPI/O to know the GPI and GPO locations. The GPI/O panel has one GPO
and six GPI connectors (Figure 110). The actual pin placement and location
are described below in Table 9 and Table 10.
Figure 110. The GPI/O Connection Location
Use Figure 111 as a reference for the pin location for both the GPI and GPO
tables.
Figure 111. The GPI/O Connection Location
Pin
5
Pin
9
Pin
Pin
1
6

GPO

The following information is about the GPO. The schematic is shown in
Figure 112. Table 9 shows the GPO's pin mapping.
Figure 112. GPO Schematic
Optoelectronic Relay
Pin
2
180
From Internal
Control
To external device
Pin
3
JUPITER L-S and LCD Series Control Panel Instruction Manual 195