S25 Or S50 - GRASS VALLEY L-S series Instruction Manual

S25 or S50

JUPITER L-S and LCD Series Control Panel Instruction Manual
Figure 44. LD16 Connection Menu
C: Lan
N: Lan
4. Press the or the
UP
N: field to Serial.
The button in the lower Right-hand corner will turn green
Take
(Figure 43).
5. Press the button to apply the change. You will then be given an
Take
option to change the Device ID.
6. Press the or the
UP
setting.
7. Press the button to apply the change.
Take
The Panel will then reboot and apply the changed settings.
Note Press the Clear button at any time to exit the menu without making changes
to the current settings. Press the Menu button at any time to exit from the
current location without making changes to the current settings but remain
in the menu.
Figure 45. S25 Control Panel
Buttons 1-25
Changing the Connection Type Using the Panel's Menu
- Connection -
Arrows to change the Connection type in the
Down
Arrows to scroll to the preferred Device ID
Down
Destination Buttons
83