Section 7 - Lcd Introduction; Overview - GRASS VALLEY L-S series Instruction Manual

LCD Introduction

Overview

JUPITER L-S and LCD Series Control Panel Instruction Manual
The Jupiter LCD series Control panels are designed to control matrix
routers through a Grass Valley Jupiter CM-4000 Control System that is
running the AccuSwitch application. Although the panels are intended to
control Concerto, Trinix, Apex, and Venus routers, any matrix router that
can be controlled by a CM-4000/AccuSwitch can also be controlled by
these panels. The LCD series is comprised of the following units: the
LCD16 and the LCD48 panels.
Note The CM-4000 must be operating with Jupiter AccuSwitch version 7.7.0 or
newer to support the LCD panels. The LCD panels are not intended for use
with CM-4000/Jupiter XPress applications nor with Jupiter VM-3000 System
Controllers.
The Jupiter LCD panels can be ordered with an AC or a DC power supply.
The AC power supply is mounted to the rear of the panel. No power switch
is present on the control panel. To power down the panel, you must discon-
nect the AC or DC power cord.
7
Section
143