Table of Contents
Advertisement
Section 11 — LCD Series Panel Operation
B.P.S Mode
172
2. Use the scroll wheel to cycle through the available level pages. Select
the levels that you want to turn off by pressing the level's button; the
buttons will then change color to amber. More than one button can be
selected at a time.
The
button will now say "SET ALL LEVELS ON." This text
Set All Levels
indicates that if the button is press again, all the levels would be
selected (highlighted white).
3. Press the
button to perform the switch on the "Selected" levels
Take
only. If "Sticky Levels" has not been enabled, the selected level buttons
will revert to amber.
Note
This mode requires at least one Destination have a button assignment in the
Jupiter CP Output set. If no buttons are assigned, then the B.P.S-Mode?
button in the Menu will be highlighted in red, and the mode will not be avail-
able.
The Button Per Source (B.P.S) mode is designed to easily assign a Destina-
tion, or a set of Destinations, that can be accessed anytime regardless of the
selected Source page. The number of displayed Destinations, and their dis-
playing order, are defined by the configuration of the Button field in the
Jupiter Control Panel Output set. You must be in the main menu to see the
button. The maximum number of Destination buttons that can be
B.P.S Mode
assigned for the LCD16 panel is 15 and the maximum number for the
LCD48 is 47. If no destination buttons have been assigned or if more than
the maximum number of destination buttons are assigned, the
button in the Main menu will be Red and will display the text, "No Dest.
Buttons Configured." The B.P.S mode will not be assessable if this is
showing.
Note
The ability to perform a Breakaway, Lock or Protect is not allowed in this
mode.
Follow these steps to perform a Take:
1. Press the Scroll wheel to go to the Main menu.
2. Press the
B.P.S Mode?
3. Press the preferred Destination button in the Destination button area.
For an example, see
yellow.
Note
These figure are for example only, the number of Destinations are configu-
rable.
Pressing more than one button will select multiple Destinations. The
selected Destination buttons will then turn white.
JUPITER L-S and LCD Series Control Panel Instruction Manual
button
.
Figure 91
and
Figure
92. Destination buttons are
B.P.S. Mode?
Hide quick links:
Advertisement
Table of Contents
