GRASS VALLEY L-S series Instruction Manual page 94

Section 5 — Connecting the L-S, LCD Panel
94
Figure 65. LCD48 Connection Menu
Display Windows
Connection
C: Lan
N: Lan
4. Use the Scroll wheel to change the Connection type in the N: field to
Serial.
The button will then turn green
Connection
5. Press the
Connection
an option to change the Device ID.
6. Use the Scroll wheel to scroll to the preferred Device ID setting.
7. Press the
Connection
The button will then turn red and the following text will
Connections
then appear, "Settings Updated -Standby-."The Panel will then reboot
and apply the changed settings.
JUPITER L-S and LCD Series Control Panel Instruction Manual
Scroll Wheel
button to apply the change. You will then be given
button to apply the change.
(Figure 65).