Selecting A Destination To Control (Multiple Destination Mode); Selecting A Source (Multiple Destination Mode); Adding Or Changing A Destination Soft Button Assignment - GRASS VALLEY L-S series Instruction Manual

Selecting a Destination to Control (Multiple Destination Mode)

Selecting a Source (Multiple Destination Mode)

Adding or Changing a Destination Soft Button Assignment

JUPITER L-S and LCD Series Control Panel Instruction Manual
2. Press the
Multiple Destination?
the page number of the display (For example,
windows' first line contains the status of 16 Destinations.
• If Destinations are undefined, the windows will show a series of
dashes. To define Destinations, see
Button Assignment on page
tion for one of the D1-D16 windows to use multiple Destination mode.
1. Press the soft button next to the Destination to be controlled so it is
illuminated. Use the
Destinations.
2. Multiple Destinations on the same page can be selected, if desired.
Once Destination(s) to be controlled are selected, the Source is switched in
basically the same was as in Single Destination mode (see
(Single Destination Mode) on page 121
Direct Category Button Method
1. Press a Category (For example, "VTR") and unit number (For example,
"2") button combination.
2. Press .
Take
Page Selection Method
1. Press . The D1 window will display
Source
appear in groups of 16, in green, in the D1-D16 windows.
2. Use the arrow buttons to scroll through the available Sources.
Up/Down
3. Select the desired Source by pressing its adjacent soft button.
4. To execute the switch, press
active Destination(s).
A Destination may be added to any unused location in the D1-D16 dis-
plays. One additional page will be available when adding Destination
assignments. Destinations can also be changed or deleted.
soft button. The D1 window will display
Adding or Changing a Destination Soft
125. You need to define at least one Destina-
arrow buttons to view additional pages of
Up/Down
for detailed information).
Source?
. The Source will be switched to the
Take
LD16 Control Panel
). The D1-D16
p00
Selecting a Source
in white. Sources will
125