Section 2 - Hardware Installation; Rack Mounting; Power Supplies - GRASS VALLEY L-S series Instruction Manual

Hardware Installation

Rack Mounting

1 RU Panel
2 RU Panel

Power Supplies

JUPITER L-S and LCD Series Control Panel Instruction Manual
This section describes hardware installation procedures for the L-S series
hardware panels.
Jupiter L-S panels mount into a standard 19 in. equipment rack. Panels are
1 or 2 rack units high (Figure 9).
Figure 9. Panel Rack Mounting
44 mm
1.75 in.
88 mm
3.5 in.
See L-S and LCD Panel Specifications on page 179
type of L-S panel.
Two methods are available for powering the L-S series hardware panels:
• AC power supply (JUP-ACPS)
• DC power supply (JUP-DCPS)
The module used is specified at the time of order.
432 mm
483 mm 17 in.
19 in.
for dimensions for each
2
Section
41