Operation; S25/S50 Protect/Lock - GRASS VALLEY L-S series Instruction Manual

S25/S50 Control Panels
Figure 75. S50 Configured for 8 Destinations
Sources 8 Destinations
S50

Operation

1. Select the Destination button on the right you wish to control.
2. Press a Source button (light green). Selecting the Source completes the
switch to the Destination.

S25/S50 Protect/Lock

S25 and S50 panels cannot initiate or remove protects or locks.
If a Destination has been protected by another panel, the selected Source
button will illuminate steady amber and the Destination will not switch. If
the Destination has been locked by another panel, the selected Source button
will illuminate steady red and the Destination will not switch. To continue,
the Destination must be unprotected or unlocked by the panel used to set
the protect or lock.
JUPITER L-S and LCD Series Control Panel Instruction Manual 131