Un-Protecting Or Unlocking A Destination; Source Swap Mode; Override - GRASS VALLEY L-S series Instruction Manual

Un-protecting or Unlocking a Destination

Source Swap Mode

Override

JUPITER L-S and LCD Series Control Panel Instruction Manual
3. Press to protect or lock the Destination(s). The
Take
will blink, which indicates that panel has been protected or locked.
• If another panel selects this Destination for control, that panel's
button will illuminate steady amber or red. If the other
Protect/Lock
panel attempts to switch this Destination, a
displayed, along with the name of the protecting panel.
• On S25 and S50 panels that lack a
when the controlled Destination is protected the Source button will
illuminate amber, and when locked it will be red.
The panel that originally imposed a protect or lock on a Destination can
clear those states for that Destination.
1. Confirm the desired locked or protected Destination(s) are selected.
2. Press the
Protect/Lock
(locked Destination). The
3. Press . The protect or lock state will be cleared.
Take
If Source Swap mode is ON, the display windows will preset to the previ-
ously-selected Source, in blue, after each Take. This permits flip-flop
switching on the LD16 panel using the
1. Press . The display windows will display various modes.
Menu
2. Press the
Panel Config?
displayed with its current status (ON or OFF).
3. Press to toggle the state ON or OFF.
Take
The panel will exit Menu mode and operate with the new state.
Overrides can be used for a quick or emergency switch to an often-used
Source and level combination. For example, the black burst generator could
be defined as the first "override" Source for a particular control panel, cor-
responding to the first override soft key position. Override names can be
customized if desired. Each override can be configured to switch any
desired combination of router levels.
Up to 10 pages of overrides (80 total) may be defined using the Jupiter file
server to build a CP Override set and assign the set to the panel. The order
Protect/Lock
button once (protected Destination) or twice
button will illuminate.
Take
and
Undo
soft button. The
Source Swap
LD16 Control Panel
button
Protect/Lock
or indicator will be
P L
button and display,
buttons.
Take
menu will be
127