Panel Setup Mode - GRASS VALLEY L-S series Instruction Manual

Panel Setup Mode

JUPITER L-S and LCD Series Control Panel Instruction Manual
Panel setup mode is used for service and troubleshooting only.
Change ID Procedure
1. Access Panel Setup mode.
2. Scroll to
Change ID?
-Change ID- From: xx To: xx
CAUTION The Panel ID shown here must agree with the ID displayed in the Address
column on MPK Devices table, and the Device # on the Panel Network Con-
figuration web page.
3. Increment to the desired ID.
4. To accept the new ID, press
Set Memory to Defaults
This menu provides options for resetting:
• All defaults
• Network defaults
• Host defaults
• Panel defaults
• Button defaults
Enter Diagnostics
This selection sequences through button and display colors. Press any
single button to identify its LED. Press any two buttons simultaneously to
exit Diagnostics mode.
Panel Reset Mode
This mode resets the panel.
The window will display the following:
.
Take
Panel Setup Mode
185