Scroll Take Mode; Front-Panel Service Modes - GRASS VALLEY L-S series Instruction Manual

Scroll Take Mode

Front-Panel Service Modes

JUPITER L-S and LCD Series Control Panel Instruction Manual
2. Press . The display windows will display various modes.
Select
3. Rotate the selector knob to choose
window will display the names of overrides for that panel.
4. Use the selector knob to scroll through and select the desired override.
5. Press to execute the override.
Take
6. Press to leave the menu selection and return to normal operation.
Clear
In Scroll Take mode, turning the selector knob switches the listed Sources
to the Destination as they scroll. Scroll Take mode is indicated by the
button blinking green.
1. Press . The display windows will display various modes.
Select
2. Rotate the selector knob to
3. Scroll to
Scroll Take
4. Press to turn Scroll Take ON or OFF.
Select
The panel exits Config Mode and operates in the new Scroll Take mode.
Note When Scroll Take is active, it is still possible to pre-select a Source with the
Category buttons, and then use the Take button to switch that Source to the
Destination.
These modes are provided for panel maintenance and troubleshooting.
They are not normally used by the operator.
• Panel Info Mode is described on
• Panel Setup Mode is described on
Override?
and press
Panel Config?
. Its current status will be reported (-ON- or -OFF-).
page 183.
page
SXY Control Panel
and press . The Preset
Select
.
Select
185.
Select
141