GPI/O
Overview
Equipment Required
Software Required
JUPITER L-S and LCD Series Control Panel Instruction Manual
The new Jupiter S, L and LCD Control panels now offer GPI/O function-
ality for every panel. GPI/O operations help customers to trigger other 3
party devices and can be triggered by other 3
ations can be:
• Source selection for both input and output Sources
• Source latching and non-latching.
• Output GPO On or GPO Pulse.
• Sequence GPI (latching and non-latching) for input Sources.
Note
If the GPI is configured for sequence, the GPI will execute the sequence.
There is no configuration setting for latching and non-latching.
LCD, S, and L panel installations:
• Phillips (cross-tip) screwdriver
There is no required Software installation for this release. The GPI/O is
shipped with the latest version of the software.
Note
The panel software must be version 1.0.2 or newer.
C
Appendix
rd
party devices. GPI/O oper-
rd
187