Basic Operation; Breakaway Switching; 2/3/4 Destinations / 4 Levels; Operation - GRASS VALLEY L-S series Instruction Manual

Section 6 — L-S Series Panel Operation

Basic Operation

Breakaway Switching

2/3/4 Destinations / 4 Levels

Operation

5/6/7/8 Destinations

130
With all available levels toggled ON (high amber), press a Source button
(light green). Selecting the Source completes the switch to the Destination.
Select only the level button(s) on the right that you wish to switch before
selecting a Source.
Note If a level button cannot be toggled ON, the level may not exist on that Desti-
nation (For example, audio on a video monitor).
With two, three, or four Destinations defined, the top row of the eight-
button cluster is used for breakaway switching of the first four levels, and
the bottom row of four buttons is used to select from up to four Destina-
tions. An example is shown in
Figure 74. S25 Configured for 4 Levels / 4 Destinations
Sources
1. Select the Destination button on the lower right you wish to control.
2. For a breakaway, select the level button(s) on the upper right for the
levels you wish to switch.
Note If the level button cannot be toggled ON, the level may not exist on that Des-
tination (For example, audio on a video monitor).
3. Press a Source button (light green). Selecting the Source completes the
switch to the Destination.
With five, six, seven, or eight Destinations defined, the eight-button cluster
on the right is used to select the Destination. Breakaway switching is not
available with this configuration. An example is shown in
JUPITER L-S and LCD Series Control Panel Instruction Manual
Figure 74.
4 Levels
4 Destinations
Figure 75.