Category Entry Mode - GRASS VALLEY L-S series Instruction Manual

Section 11 — LCD Series Panel Operation
Source
Destination

Category Entry Mode

168
Figure 86. Multi-Selection Displayed
SRC-002
OUT-017
9. Select the button. The Take request is immediately sent to the host.
Take
The panel will then show the new current Source on line 2 of the button.
The Multiple Destination mode also supports "Sticky Destinations." When
the "Sticky Destinations" feature is enabled (or turned on), the previously
selected destinations will remain selected after a Take is preformed.
The Category Entry mode is designed to sort or group the Sources and Des-
tinations by type, which provides quick, direct access to all of the Sources
and Destinations. The LCD16 panel will change between displaying
Sources and Destinations. Once selected, up to 98 categories can be dis-
played by using the Scroll wheel. The LCD48 is divided to show both
Sources and Destinations.
Note You cannot perform a breakaway in the Category Entry mode.
The following figures show the Category Entry mode for the LCD16 and
the LCD48 panel.
Figure 87. LCD16 -Category Entry Mode
Category Buttons
JUPITER L-S and LCD Series Control Panel Instruction Manual
Status Button
Select Source Category
Selection
Button
Display Button
Command Buttons