L32/L64/S100 Panels; Ld4 Panels - GRASS VALLEY L-S series Instruction Manual

Section 2 — Hardware Installation

L32/L64/S100 Panels

VTR VTR VTR VTR
1 2 3 4

LD4 Panels

44
The L32 and L64 panels have 32 or 64 buttons respectively, on the left side
of the panel that can be used for Button-per-Source operation. The S100
panel has 100 buttons for this purpose. Using the label resources described
above, these buttons can be labeled 1 through 32, 64, or 100.
Figure 12. L32 with Custom Labels
VTR VTR VTR VTR VTR
5 6 7 8 9
If the button assignments are more or less permanent, you may want to
label them more specifically. An example is shown in Figure 12. See
Button Configuration on page 46
The LD4 panels have a cluster of 16 buttons on the right side that can be
used for category/number operation. See Figure 13.
Figure 13. LD4 Control Panel
These buttons have default categories assigned, as shown in Figure 14.
Figure 14. Type CPESXTND Input Set Default Categories
VTR CG NET
1 2 3
1 2 3
REM FILM PTCH
6 7 8
6 7 8
It is possible to configure the panel with a custom category set. Note that
the button order of the set is grouped with the first 10 entries on the left and
the following 6 entries on the right. See
page 46 for more information.
JUPITER L-S and LCD Series Control Panel Instruction Manual
for more information.
VCR CAM
AUX
4 5
4 5
11
STU TEST
SAT
9 0
9 10 14
Category Button Configuration on
Destination
Preset
Status
Source
EJ SS
12 13
FS MISC
15 16