Section 6 — L-S Series Panel Operation
Front-Panel Service Modes
110
When the
button is illuminated, the Undo button lights whenever a
Preset
new Source is selected as a preset, and after each Take is performed. As
above, pressing
when it is illuminated restores the last Source to
Undo
preset, and by pressing
forth between two Sources.
These modes are provided for panel maintenance and troubleshooting.
They are not normally used by the operator.
• Panel Info Mode is described on
• Panel Setup Mode is described on
JUPITER L-S and LCD Series Control Panel Instruction Manual
and
repeatedly you can swap back and
Undo
Take
page
183.
page
185.