Removal Of The Rear Swinging Arm - Husqvarna TR 650 TERRA 2013 Workshop Manual

TR 650 TERRA 2013 - TR 650 STRADA 2013
2
1
3
5
6
7
REAR SUSPENSION

Removal of the rear swinging arm

- Position a lift under the lower central beam of the chassis and lift the motor-
cycle until the rear wheel has been lifted up off the ground.
- Remove the wheel and the chain guard as described in the relative para-
graphs.
- Remove the clips (1) that fix the protection (2) to the swinging arm.
1
Fasten the vehicle in a steady position so that it cannot overturn;
use suitable stands and belts.
H111013
- Remove the clamp (3) of the rear brake tube by loosening the relative screw
(4).
4
H111014
- Remove the rear brake calliper (5) and place it to the side, being careful not
to bend/damage the brake tube.
H111015
- Loosen and remove the screw (6) fixing the drop link (7) to the swinging arm.
H111016
J.9
Workshop Manual Ed. 09-2012