Removal Of Rear Chassis Complete With Mudguard And Air Box - Husqvarna CR 125 2011 Workshop Manual

H06732
3
Workshop Manual Ed. 06-2011
GENERAL PROCEDURES
CR 125 2011 - WR 125 2011

Removal of rear chassis complete with mudguard and air box

- Remove saddle, side panels, tank, silencer, as outlined in the relevant para-
graphs.
- Shear the plastic clips securing wiring to rear chassis (WR).
- Disconnect the connector (1) between main wiring harness and rear wiring
harness (WR).
1
- Loosen clamp (2) securing filter box to carburettor.
2
H06733
- Using a 10 mm wrench, loosen screws (3) on both sides of chassis.
H06993
E.6