Replace Gearbox Control Shaft Radial Sealing Ring; Preliminary Operations; Removing Oil Seal From Gearbox Shaft; Fitting Gearbox Shaft Oil Seal - Husqvarna TC 449 2011 I.E. Workshop Manual

H01997
H01997
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

REPLACE GEARBOX CONTROL SHAFT RADIAL SEALING RING

Preliminary operations

Gear lever disassembly

Removing oil seal from gearbox shaft

• Using a suitable tool, remove oil seal (1) with the utmost care.

Fitting gearbox shaft oil seal

• Fit oil seal (1) using a suitable tool.
F1.67
Workshop Manual Ed. 03-2012