Figure 2-21 Sv8100 Encryption Configuration - NEC Univerge SV8100 Features And Specifications Manual

Issue 5.0
Source
DT700
DT700
DT700
Encryption On
S = Supported
N = Not Supported
Conditions
In Version 3000 software or higher the system can be programmed to blink the page

number of a DT300/DT700 DESI-less terminal when it receives an incoming call, or switch
to the page the incoming call is on. Furthermore, a default page can be defined for the
DESI-less terminal to change to when it goes idle or when it has answered a call.
DT300/DT700 terminals installed in a SV8100 with the IPK/IPK II Migration system do not

support the DESI-less page switching and blinking.
2 - 1312
Table 2-50 DT700 Supported Encryption (Continued)
Destination
PSTN
IP Network
(SIP/H323/CCIS
DT700
Encryption Off

Figure 2-21 SV8100 Encryption Configuration

SRTP
S DT700 VoIPDB
Encrypt between DT700 and VoIPDB
S DT700 VoIPDB
Encrypt between DT700 and VoIPDB
N
UNIVERGE SV8100
Comment
SV8100/SV8300 Terminals