Chapter 1 Installing Operating System
3.2
Changing the Default Target
Change the default target at the system startup according to the following procedure.
Install the base environment of the server ([Server with GUI]) in advance to start up the graphical target
(graphical login mode).
3.2.1
Changing to the graphical target (graphical login mode)
1.
Log in by using the root user.
2.
Execute the following command to change the setting to the graphical target (graphical login mode).
# systemctl set-default graphical.target
3.
Execute the following command to restart this system.
# systemctl reboot
3.2.2
Changing to the multi-user target (text login mode)
1.
Log in to the server as the root user. If you login with graphical mode, select [Others...] to login.
2.
Execute the following command to change the setting to the multi-user target (text login mode).
# systemctl set-default multi-user.target
3.
Execute the following command to restart this system.
# systemctl reboot
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
3. Procedure for Changing the System Environment Setting
49