Nec Pbx Configuration; Prerequisites; Sip Trunking Information From Windstream; Nec Univerge Sv8100 - NEC UNIVERGE SV8100 Configuration Manual

Windstream
NEC PBX C
S 2
ECTION
This section provides information to NEC's solution providers and NEC Associates for
configuring an NEC UNIVERGE SV8100 to connect to a Windstream SIP Trunk
service provider, utilizing a STATIC configuration.
2.1
SIP Trunking Service Configuration Guide
ONFIGURATION

Prerequisites

Before you configure the UNIVERGE SV8100, you must have the following
information available.
2.1.1

SIP Trunking Information from Windstream

Primary SIP Proxy Server IP Address

Number Plan, if applicable for the Point-to-Point Connection

Trunking DID(s)

The DID(s) are forwarded to the Public WAN IP address(s),
DNS or DNS SRV records of the PBX.
2.1.2

NEC UNIVERGE SV8100

SV8100 CPU firmware version 3.00 or higher

IPLA-R UNIT (PZ-32IPLA, PZ-64IPLA or PZ-128IPLA)

SIP Trunking (minimum of four licenses)

Digital, IP and TDM Telephones

2.1.3

Installation Worksheet

Use the worksheet to record the information needed for setting up
the SIP Trunking service.
Issue 1.0
3