NEC Univerge SV8100 Features And Specifications Manual page 1140

Issue 5.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
10-03-03 ETU Setup (LCA PKG Setup) –
Transmit Gain Level (S-Level)
10-03-04 ETU Setup (LCA PKG Setup) –
Receive Gain Level (R-Level)
2 - 1114
Description/Comments
Program all on-premise 500/2500
type single line telephones with
circuit type 2. Set the DIOPU trunk
to type 1 when trunks should be
defined for off-premise extension
(OPX) use.
Set up and confirm the Basic
Configuration data for each blade.
Assign transmit and receive levels
for 500/2500 type single line
telephones.
Single Line Telephones, Analog 500/2500 Sets
UNIVERGE SV8100
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
Level
2 3


