NEC Univerge SV8100 Features And Specifications Manual page 1171

UNIVERGE SV8100
Program
Program Name
Number
11-07-01 Department Group Pilot
Numbers – Dial
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
16-01-01 Department Group Basic Data
Setup – Department Name
16-01-02 Department Group Basic Data
Setup – Department Calling
Cycle
16-01-03 Department Group Basic Data
Setup – Department Routing
when Busy (Auto Step Call)
16-02-01 Department Group Assignment
for Extensions
Operation
Operating procedures depend on the application.
SMB8000 Interactive Voice Response
Description/Comments
Assign pilot numbers to each
Department Group set up.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Set the function mode for each
department group.
Set the call routing for Department
Calling. Routing can be either
circular (cycles to all phones in
group) or priority (cycles to highest
priority extensions first).
Set how the system routes an
Intercom call to a busy
Department Group member.
Intercom callers to the extension
can either hear busy or route to
the first available department
number. This only occurs for calls
to the extension directly, not the
department number assigned in
Program 11-07.
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Assigned Data
1
Up to eight digits
(default not assigned)
0 = Normal
1 = Special
(default = 0)
Maximum 12
characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
(default = 0)
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
Department Groups
1~999
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
Issue 5.0
Level
2 3






2 - 1145