Emission Control Devices
Engine
Precautions for Emission Control Devices
Refer to "General Precautions in Section 00 (Page 00-1)".
Fuel Injection System Description
GSF1250 motorcycles are equipped with a fuel injection system for emission level control. This fuel injection system is
precision designed, manufactured and adjusted to comply with the applicable emission limits. With varying engine
conditions, all of the fuel injection volumes are precisely controlled by the programmed injection maps in the ECM to
reduce CO, NOX and HC. Adjusting, interfering with, improper replacement, or resetting of any of the fuel injection
components may adversely affect injection performance and cause the motorcycle to exceed the exhaust emission
level limits.
1. Fuel tank
2. Fuel pump
3. Fuel mesh filter (For low pressure)
4. Fuel feed hose
Precautions
General Description
7
8
4
5. Fuel delivery pipe
6. Fuel pressure regulator
7. Fuel filter (For high pressure)
8. Fuel injector
Emission Control Devices:
1
6
2
3
5
"A": Before-pressurized fuel
"B": Pressurized fuel
"C": Relieved fuel
1B-1
B718H11200001
B718H11201001
"A"
"B"
"C"
I718H1170001-02