A license key is programmed into each unit during production and can be found written on the
Configuration Data Summary Label which is attached to the Deployment Guide. If
subsequently the license key has been mislaid, replacement keys can be applied for online or
via your distributor.
If a valid license key is not detected in the unit's non-volatile memory then the user is
prompted to enter a valid key. PTP 300 Series bridge units are shipped as link pairs and, as
such, valid license keys are entered during the production process. To enter a license key,
simply type or paste the license key into the data entry box (Figure 55) and click the 'validate
license key' button.
7.7.3 Installation Wizard Step 1 - Interface Configuration
Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP)
configuration (Figure 56).
The Interface Configuration page contains the following fields:
IP Address
Internet protocol (IP) address. This address is used by the family of Internet protocols to
uniquely identify this unit on a network.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 56 - Installation Wizard Internet Protocol Configuration
107
7 Web Page Reference