Table of Contents
Advertisement
A p p l i c a t i o n V i e w s
Table 5: NS Features
Parameter
disable
The feature is not requested.
negotiate
Negotiate for the feature. The feature is
desired, but if not available bring up the
virtual circuit anyway, without the
feature.
required
Required for call. Bring up the
connection only if the feature is available
on both ends.
forceOn
The feature is required for the circuit to
come up.
Channel Statistics
This section displays the following information:
UsedChan
The number of NS Channels in use.
MaxChan
The maximum number of NS Channels used.
UnavailChan
The number of NS Channels not available for
allocation.
D e v i c e M a n a g e m e n t
Description
Switched Service Configuration Table
View
Access:
From the Icon Subviews menu for the MotSSApp
Application icon, select Configuration Table.
This view lists the Configuration parameters that
makeup the Switched Service/LBU Table.
Column headings are as follows:
Number
The particular Switched Service/LBU Table entry
being configured. The number of instances
defined by this entry depends on the configured
value of the Maximum Switch Service Entry
parameter in the Node record (up to a maximum
of 1024 entries). If this value is 0, no switched
Service/backup links may be configured i.e. this
table will be empty.
Destination
A unique name that identifies this entry.
Monitored Port
The X.25 port to be monitored for link failure.
This is the port whose calls are rerouted in the
event of port failure. The format must be the
following: X25-n, FRI-nSm OR BRI-nCp where n
is the port number, m is the station number and
p is BRI channel number.
Page 25
S u p p o r t e d A p p l i c a t i o n s
M o t o r o l a V a n g u a r d
Hide quick links:
Advertisement
Table of Contents
