Sntp Authentication-Key - Motorola BSR 64000 Reference Manual

sntp authentication-key

The sntp authentication-key command enables authentication for SNTP. The no
sntp authentication-key command disables authentication for SNTP.
Use the sntp authentication-key command to authenticate SNTP sources for
additional security.
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
sntp authentication-key <num:1-4294967295> [md5 <string>]
no sntp authentication-key <num:1-4294967295>
Command Syntax
num:1-4294967295
md5
string
Key number.
Use the md5 algorithm (presently this is the
only algorithm supported).
Key value, up to 8 characters.
IP Commands
2-65