14.1.1 Installing the Recommended GPS Synchronization Kit
The recommended GPS Sync installation kit includes the following:
x
GPS Sync Unit from MemoryLink (see Figure 143), with three attached terminated
Ethernet and Sync cables and cable glands (2) which connect directly to a PTP 600
Series ODU.
x
Mounting bracket and mounting bracket bolts
x
Outdoor rated UV resistant cable tie
x
GPS Sync Unit User Manual.
In addition to the hardware mentioned above, it is recommended to have an appropriate
lightning protection (PTP LPU as described in Section 15.6 "Lightning Protection and E1/T1").
NOTE: Refer to GPS Sync Unit User manual for details on the lengths of cables used to
connect the GPS Sync Unit to the ODU and PTP LPU.
14 TDD Synchronization Configuration and Installation
Figure 143 - GPS Synchronization Unit
257
Guide