Port Connections; Installing Sfp Transceivers - Motorola EX-3524 Installation Manual

20
3.4 Port Connecctions

3.4.1 Installing SFP Transceivers

The switch provides slots for optional (not provided) SFP transceivers. The supported transceiver types are listed
below:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LH
• 1000BASE-FX
• 1000BASE-T
SPF transceivers are hot-swappable. The switch does not need to be
NOTE
powered off before installing or removing the transceiver.
To install a SFP transceiver:
1. Consider network and cabling requirements to select an appropriate transceiver type also compatible with
the switch transceiver support.
2. If the SFP slot is covered with a rubber protective cap, remove the cap and keep it for later replacement.
3. Insert the transceiver with the optical connector facing outward and the slot connector facing down. Note
that SFP transceivers are keyed so they can only be installed in the correct orientation.
EX-3524/EX-3548 Layer 2 Gigabit Ethernet PoE/PoE+ Switch