Administrator's Handbook
About SHELL Commands
You begin in SHELL mode when you start a CLI session. SHELL mode lets you perform the following tasks with
your Motorola Gateway:
◆
Monitor its performance
◆
Display and reset Gateway statistics
◆
Issue administrative commands to restart Motorola Gateway functions
SHELL Prompt
When you are in SHELL mode, the CLI prompt is the name of the Motorola Gateway followed by a right angle
bracket (>). For example, if you open a CLI connection to the Motorola Gateway named "Motorola-3000/
9437188," you would see
SHELL Command Shortcuts
You can truncate most commands in the CLI to their shortest unique string. For example, you can use the trun-
q
cated command
in place of the full
reset
the
command, since the first characters of
The only commands you cannot truncate are
cations, you must enter the
You can use the Up and Down arrow keys to scroll backward and forward through recent commands you have
entered. Alternatively, you can use the
108
Motorola-3000/9437188>
quit
command to exit the CLI. However, you would need to enter
reset
restart
restart
clear
and
commands in their entirety.
!!
command to repeat the last command you entered.
as your CLI prompt.
restart
are common to the
clear
and
. To prevent accidental interruption of communi-
rese
for
command.