Table of Contents
Advertisement
posts or structures that are too large for the standard brackets. Optional remote antenna mount
hardware is also available for use with the alternate mounting hardware.
Equipment Specification
The specifications listed in the following table apply for all Infrastructure devices.
Table 2-2
Characteristic
Output Power
RF Modulation
Operating Frequency (GHz)
Maximum Burst Data Rate
Spectrum Used
The following list defines the standard hardware components for IAPs and MWRs.
•
•
•
•
•
The Network Operator must supply the following equipment.
•
•
•
Error! Reference source not found. Error! Reference source not found.
HOTZONE DUO Infrastructure Device Radio Characteristics
2.4GHz
802.11 b/g
27 dBm
CCK/OFDM
2.4-2.4835
54 Mbps
20 MHz
Device Enclosure with 2 N-type Female Antenna Connector
120V A/C Power Cable with a NEMA 5-15 plug
2 Antennas with N-type Male Antenna Connector
Weatherproof RJ-45 Connector
Mounting Bracket (Standard and Optional)
Mounting Location
Power Source (120V/240V A/C 50/60 Hz)
Ethernet connection between the IAP and the MiSC
5.8GHz
802.11
26 dBm
OFDM
5.725-5.825
54 Mbps
20 MHz
2-2
Advertisement
Table of Contents
