Installing Hardware Options
Installing or Removing Memory Modules (SIMMs)
To add or remove a set of memory modules (SIMMs) to a bank, see Figure 3-3 and follow
this procedure:
1. Turn off your system and unplug the power cord from the wall outlet.
2. Unlock and remove the thumbscrews that secure the top cover and remove the cover,
as described earlier in this chapter.
3. Remove the SIMM board by pushing back on the latches and lifting it out of its
connector.
3-4 MicroVAX 3100 Models 88/98 User Information
J1
J2
J3
J4
J5
J6
J7
J8
Figure 3-2 SIMM Bank Configuration
MLO-013629