15. To add memory modules (DIMMs), refer to Figure 1-7 as you perform the following
steps:
a) Install the DIMM
straight into the socket. Position the DIMM so that both the
retaining clips
at the socket ends engage. Pay close attention to the keying on
the DIMM and the socket.
b) Repeat for the remaining module.
Figure 1-7 Installing the Memory
DIGITAL Personal Workstation 600a Upgrade Guide 1–9
The 600a Upgrade
J6
J5
J4
J3
J2
J1
2
1
MLO-013643