Installing Or Removing Memory Modules (Simms); Figure 3-2 Simm Bank Configuration - Digital Equipment VAX 4000 108 User Information

Installing Hardware Options

Installing or Removing Memory Modules (SIMMs)

To add or remove a set of memory modules (SIMMs) to a bank, see Figure 3-3 and Figure
3-4 and follow this procedure:
1. Turn off your system and unplug the power cord from the wall outlet.
2. Unlock and remove the thumbscrews that secure the top cover and remove the cover,
as described earlier in this chapter.
3. Remove the SIMM carrier by pushing back on the latches and lifting it out of its
connector.
3–4 VAX 4000 Model 108 User Information
J1
J2
J3
J4
J5
J6
J7
J8

Figure 3-2 SIMM Bank Configuration

MLO-013629