Station Programming Error Codes - Toshiba Strata CIX Programming Manual

Telephone button programming manual
Hide thumbs Also See for Strata CIX:
Table of Contents

Advertisement

Station Programming Error Codes

Program
Code
33
33
49
49
49
51
200
52
54
80
80
96
98
50
201
51
52
80
33
49
49
49
49
202
49
51
51
52
Strata CIX/CTX Telephone Button Programming 11/04
Sub-
FB
parameter
FB01
The entered Shelf/Slot/Circuit value is out of range.
FB12
The entered System Call Forward index is out of the range.
The selected PDN(s) conflicts with an existing PDN(s)
FB01
assignments for the selected circuit.
FB02
Station Type cannot be changed.
FB15
The desired DN does not exist.
FB22
The entered value conflicts with an existing numbering
FB00
scheme.
The entered value conflicts with an existing ISDN assignment
FB00
etc.
The quantity of lines, ISDN channels and PDNs entered
FB00
exceeds the number of ports licensed with this processor.
FB00
The DN does not exist.
A PCB without ìDKT/SLT setting allowedî is designated for a
FB01
PCB connecting the selected ISDN extensions.
FB00
The allowed number of extensions has been exceeded.
The quantity of station speed dial bins entered exceeds the
FB35
system's capacity.
The DN entered is the DN that is used as the administration
-
terminal.
FB which this error occur : FB01
FB01
The entered number is not the extension number.
FB01
The entered number is not the extension number.
FB01
The entered value is not a valid extension.
FB01
The equipment number entered is out of the range.
PCB assignment is not set for the ISDN card connecting
FB01
selected extensions.
FB01
The entered equipment is using as other ISDN extension.
FB02
An ISDN trunk channel group conflict has been detected.
Although the P-P connection was selected, an additional DN
FB02
is registered.
FB26~FB32
The desired value conflicts with existing ISDN extensions.
The Primary DN entered conflicts with a value of an existing
-
numbering scheme.
FB00, FB26
The desired value conflicts with existing number schemes.
~FB32
FB00
A DN used for DKT extensions is designated.
Station Programming Error Codes
Error Descriptions
System Error Codes
2-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctxStrata ctx28Strata ctx100Strata ctx670

Table of Contents