Simple Contact Closure Interface (Scci) Port; Port; Malm (Located On Auxiliary Input Panel); Touch Panel Controller - Christie CP2210 Service Manual

Section 8: Specifications

8.3.5 Simple Contact Closure Interface (SCCI) Port

Interface
Connector
Number and type of I/O
Input Current
Input forward voltage drop
8.3.6 3D Port
Interface
Connector
Bit Rate
Data Format
Communication Protocol

8.3.7 MALM (located on Auxiliary Input Panel)

Interface
Connector
Number of I/O Lines
8.4

Touch Panel Controller

8.4.1 TPC-660E

Type of Display
Display Size
Display Resolution (H x V pixels)
Maximum Dimensions (W x H x D)
Integrated Operating System
Communication Interface with Projector
Power Requirement
Interface Connector
8-6
Opto-LED inputs, TTL voltage output
9-pin subminiature D, female
Input 1 - Lamp Off
Input 2 - Lamp On
Input 3 - Douser Open
Input 4 - Douser Closed
Output 1 - Projector Health (high = health ok)
5mA nominal, 50mA maximum
1.1V nom., 1.4V max. (@5mA)
Proprietary 3D connector
15-pin subminiature D, female
1,200 bps
1 start bit, 8 data bits, 1 stop bit, no parity
RS232 and GPIO
3.3V CMOS
9-pin subminiature D, female
4 GPIO
Color VGA TFT LCD, backlit
144.8 mm (5.7 inches) diagonal
640 x 480
195 mm x 148 mm x 44.4 mm
®
Microsoft Windows XPe
10/100Base-T Ethernet
1.02 A maximum at 24VDC ± 10%
12-pin Circular connector (push-pull)
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)