Christie CP2210 Service Manual page 123

3D Frame Rate Multiple (TFR)
Setup frame rate multiple for 3D control
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select 3D frame rate for the current channel.
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
Get Certificates (TIG)
Gets the LD or ICP certificate.
SUBCODE DESCRIPTION OF USE
ENGC
Retrieve LD Certificate
ICPC
Retrieve ICP Certificate
EXAMPLES:
(TIG+ENGC?) Gets the LD certificate
(TIG+ICPC?) Gets the ICP certificate
3D Input Reference (TIR)
Setup the Input Reference for 3D control.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101-164.
NONE
Select input reference for the current channel.
EXAMPLES:
(TDK+C101 "Use GPI (polarity=true)") set Input Reference to 'Use GPI (polarity=true)' on channel 101
(TDK+C101?) get Input Reference for channel 101
Time/Date (TMD)
Set/get the time, date and time zone.
SUBCODE DESCRIPTION OF USE
DATE
Get the date in the form yyyy/mm/dd. Read-only.
DSTA
Set/get the daylight savings time adjust value.
TIME
Set/get the local time in the form hh:mm:ss. Ready only.
TOFF
Set Time Offset in seconds (± 900 seconds). Must be powered ON. (Write-only)
ZONE
Set/get the time zone
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)
Section 7: Serial API
7-23