Physical Specifications; Regulatory; Safety; Electro-Magnetic Compatibility - Christie CP2210 Service Manual

Section 8: Specifications
CDXL-18SD
CDXL-20SD
Wait time between lamp strikes
Warm up time to full brightness
NOTE: Projectors typically force a 10 minute cool down period. Ensure you do not re-strike the lamp any
sooner than 2 minutes into this cool down period since hot re-strikes reduce lamp life.
8.7

Physical Specifications

Size (L x W x H):
(without lens, with feet at minimum length)
Weight:
As installed with lens
Shipping (includes packaging)
Operating Position:
Rotation about projection axis
Tilt of projection axis from horizontal
8.8

Regulatory

This product conforms to the following regulations related to product safety, environmental requirements and
electromagnetic compatibility (EMC):

8.8.1 Safety

• CAN/CSA C22.2 No. 60950-1
• UL 60950-1
• IEC 60950-1

8.8.2 Electro-Magnetic Compatibility

Emissions

• FCC CFR47, Part 15, Subpart B, Class A - Unintentional Radiators
• CISPR 22/EN 55022, Class A - Information Technology Equipment

Immunity

CISPR 24 / EN55024 EMC Requirements - Information Technology Equipment

Environmental

• EU Directive (2002/95/EC) on the restriction of the uses of certain hazardous substances (RoHS) in electri-
cal and electronic equipment and the applicable official amendments)
• EU Directive (2002/96/EC) on waste and electrical and electronic equipment (WEEE) and the applicable
official amendment(s)
8-8
1500 hours
1500 hours
2 minutes minimum
20 minutes maximum
665 mm (26.18 inches) x 688 mm (27.08 inches) x 395 mm
(15.55 inches)
43 kg (95 lbs)
60 kg (132 lbs)
± 15 degrees maximum
± 15 degrees maximum
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)